How to Say "HELLO" and "HI" in Morse Code

Introduction

Morse code is a method of communication that utilizes dots (.) and dashes (-) to convey text characters. Various combinations of dots and dashes are used to write letters and numbers that jointly form whole messages.

This code can also be created using sounds or flashes. When using sound, the dots are uttered as "dits," and the dashes are uttered as "dahs."

In this post, we’re going to be looking at how you can say “Hello” and “Hi” using Morse code. These words are common terms for greetings and introductions, and it can be handy to know how you can say them through Morse code. 

Read more: If you want to learn about Morse code in detail, you can check out this blog post on our website.

How Can You Say Hello and Hi in Morse Code

You can say “hello” and “hi” in Morse code using the following combinations of dots and dashes:

Hello: .... . .-.. .-.. ---

Hi: .... ..

These are the combinations that you can use when writing the code. If you want to vocalize the code instead, the sound combinations would be:

Hello: Dit-dit-dit-dit Dit Dit-dah-dit-dit Dit-dah-dit-dit Dah-dah-dah-dah

Hi: Dit-dit-dit-dit Dit-dit

Moving on, we're going to be looking at a detailed explanation of how to say the words “hello” and “hi” in Morse code.

Detailed Explanation of Hello and Hi in Morse Code

First of all, let’s take a look at the individual letters in “hello” and “hi” to understand how they are written in Morse code.

Detailed conversion of “Hello” in Morse Code

Detailed conversion of “Hi” in Morse Code

1. How to Flash Hello and Hi in Morse Code

You can also convey a message in Morse code using a light. For example, you can turn a flashlight quickly on and off to convey the dots and dashes.

Here is how you can flash “hello” and “hi” in Morse code using a light

For “Hello”:

• To convey the “H,” you have to flash the light quickly four times in succession
• To convey the “E,” you have to flash the light quickly ONE time
• To convey the “L,” you have to give ONE quick flash, ONE long flash, and then two quick flashes
• (For the second “L,” you have to do the same one more time)
• To convey the “O,” you have to give three long flashes

For “Hi”:

• To convey the “H,” you have to flash the light quickly four times in succession
• To convey the “I,” you have to flash the light quickly two times

There has to be the duration of one “dit” or one quick flash between each of these letters so that they are distinguishable.

2. How to Blink Hello and Hi in Morse Code

Just as you can use a flashlight to convey messages in Morse code, you can also do it by blinking your eyes.

If you are looking at someone, and you want to tell them something using Morse code, here is what you can do:

• You can blink your eyes quickly to show a “dot” or “dit”
• You can blink your eyes and keep them shut for half a second to show a “dash” or “dah”

When conveying the “dash,” you should just take care to keep your eyes closed for a brief moment.

Now, moving on…

Here is how you can blink “hello” and “hi” in Morse code

For “Hello”:

• To convey the “H,” you have to blink your eyes quickly four times
• To show the “E,” you have to blink your eyes quickly one time
• To convey the “L,” you have to blink your eyes quickly once, then shut your eyes for half a second, and then blink your eyes quickly twice
• (For the second “L,” you just have to repeat the above)
• To convey the “O,” you have to blink your eyes three times while keeping them shut for a moment between each blink

For “Hi”

• To convey the “H,” you have to blink your eyes quickly four times

• To convey the “I,” you have to blink your eyes quickly two times

 The Morse code for Hi is quite simpler compared to the Morse code for Hello.

3. How to Tap Hello and Hi in Morse Code

If you are not able to convey your message in Morse code using light flashes or blinks, you can also try doing it with taps. You can tap a hard surface to convey the “dits” and “dahs” and create whole messages. A quick tap can translate to a “dit”, whereas a longer tap can translate to a “dah”.

Here is how you can say “hello” and “hi” in Morse code tapping

 

For “Hello”:

• To convey the “H,” you have to tap the surface quickly four times
• To convey the “E,” you have to tap the surface quickly one time
• To convey the “L,” you have to tap the surface quickly once, then tap it for a slightly longer duration, and then quickly tap it two times quickly again (the long duration here means that you should keep your hand/finger pressed against the surface)
• (For the second “L,” do the same thing as above one more time)
• To show the “O,” give the surface three long taps.

For “Hi”:

• To convey the “H,” you have to tap the surface quickly four times
• To convey the “I,” you have to tap the surface quickly two times

 

How Do You Say Hello and Hi in Other Languages Using Morse Code?

Since Morse code is used for all sorts of text characters, it means that you can say hello and hi in any language that you want. It’s not just for English.

• If you want to say hello in Spanish, the word is "Hola," and the Morse code is: .... --- .-.. .-
• If you want to say hello in French, the word is "Bonjour," and the Morse code is: -... --- -. .--- --- ..- .-.
• If you want to say hello in Italian, the word is "Ciao," and the Morse code is: -.-. .. .- ---

How Can You Quickly Create Morse Code Online?

Nowadays, there are online tools available that help you quickly change regular text into Morse code. You can change strings of text into their respective Morse code translation, which you can share afterward with your friends by messaging them or sending them an email.

You can try out the Morse code translator that we have available on our website. The tool has a simple working where you have to enter your text string in the input box and instantly get the Morse code translation as the output.

Here is what it looks like:

Conclusion

And with that, we’re going to bring our discussion to a close.

In the blog post above, we have discussed how you can say the greetings “hello” and “hi” using Morse code. It can be a fun thing to learn and share with your friends.

There are a number of different methods that you can use for sending Morse code messages. You can either convey the messages by drawing the dots and dashes, making the sounds of dits and dahs, flashing a light, blinking, and even tapping on a surface.

Related Blogs